• ring terminal

    6 Gauge 5/16″ Ring Terminal

    $0.90
  • 2-Cavity Packard 56 Series Connector for Delco 10SI Alternators

    2-Cavity Packard 56 Series Delco 10SI Alternator Connector

    $1.00
  • solenoid

    12-Volt Conversion Solenoid

    $31.50
  • #B9010-006, 3/4" Galvanised Steel Conduit (Sold by the Foot)

    5/8″ Galvanized Steel Conduit

    $15.00$56.25
  • 5-Cavity Packard 56 Series Female Terminal Connector

    5-Cavity Packard 56 Series Female Terminal Connector

    $1.31
  • ring terminal

    10/12 Gauge x #10 Flag Ring Terminal

    $0.40
  • heat shrink

    Heat Shrink – .75″ ID Bulk, Sold by the foot. (Used to Seal Battery Cable) – Black

    $4.75
  • ring terminal

    14/16 Gauge x 5/16″ Ring Terminal

    $0.20
  • spark plug terminal

    10/12 Gauge x 1/4″ Female Quick Disconnect Terminal

    $0.20
  • solenoid

    Premium 12-Volt Bosch Starter Solenoid

    $34.75
  • #B9023-006, IHC/Farmall Carburetor Float

    IHC/Farmall Carburetor Float

    $17.75
  • ring terminal

    6 Gauge #10 Ring Terminal

    $0.80
  • ID Tag

    IHC Serial Number I.D. Tag

    $21.99
  • bullet connector

    14/16 Gauge .156 Male Bullet Terminal

    $0.83
  • boot

    Right Angle Coil Boot

    $1.25
  • spark plug wire holder

    John Deere Rubber Spark Plug Holder

    $6.99
  • alternator bracket

    IHC/Farmall M, Super M, I6, O6, W6, 400, 450 Alternator Bracket with Adjusting Arm

    $46.75
  • John Deere Light Mounting Clamp Half

    John Deere Light Mounting Clamp Half

    $11.99
  • knob

    Fuel Cap

    $10.99
  • ID Tag

    IHC Serial Number I.D. Tag

    $21.99
  • #B9011-001, 3/16" Stainless Steel Conduit (Sold by the Foot)

    3/16″ Stainless Steel Conduit

    $18.00$67.50
  • alternator pulley

    Alternator/Generator Pulley 3/8″ (10mm) Belt Width X 2.89″ OD X 17mm ID with 1.33″ Offset

    $10.50
  • spark plug adapter

    Spark Plug Adapter (1/2” Pipe to 14mm)

    $10.75
  • The components of the kit laid out against a white background.

    Comprehensive Carburetor Repair Kit for MS DLTX71, DLTX72

    $114.99
  • uncrimped straight spark plug terminal

    Copper Straight Ford Type Spark Plug Terminal

    $1.00
  • battery terminal

    1 & 2 Gauge Positive Straight Battery Terminal

    $5.75
  • battery lug cover

    Heat Shrink – .75″ ID Cut to 1.25″ length (Used to Seal Battery Cable) – Black

    $0.50
  • battery cable terminal

    2 Gauge Straight Battery Cable Lug (1/2″ Hole)

    $1.50
  • distributor boot

    Old Style Straight Distributor/Magneto Boot

    $1.25
  • fuel sending unit

    John Deere Fuel Sending Unit (30 – 250 Ohms)

    $47.99
  • soldenoid

    12-Volt Prestolite Solenoid

    $21.50
  • ID Tag

    Large Auto Lite I.D. Tag

    $7.00
  • Wire Separator Kit (7mm, 8mm; Pack of 6)

    Wire Separator Kit (7mm, 8mm; Pack of 6)

    $9.75
  • bullet connector

    12 Gauge .156 Male Bullet Terminal

    $1.31
  • wire loom

    3/4 Inch Asphaltic-Coated Wire Loom

    $12.75$150.50
  • battery cable terminal

    1 Gauge Straight Battery Cable Lug (3/8″ Hole)

    $1.50
  • battery terminal

    3/0 Gauge “T” Type Positive Battery Terminal

    $7.00
  • heat shrink

    Heat Shrink – .4″ ID Bulk, Sold by the foot. (Used to Seal 10 & 12 Gauge Wire) – Black

    $4.75
  • battery cable terminal

    1 Gauge Straight Battery Cable Lug (1/2″ Hole)

    $1.50
  • side view of bolt

    3/8″ Ford Sediment Bowl Retaining Bolt

    $17.99
  • Right Angle Snap Cage Screw-Together (Bakelite Cover) Spark Plug Terminal

    Right Angle Snap Cage Screw-Together (Bakelite Cover) Spark Plug Terminal

    $4.20
  • #B9010-005, 1/2" Galvanised Steel Conduit (Sold by the Foot)

    1″ Galvanized Steel Conduit

    $21.00$78.75
  • Full kit photo

    Premium/ Comprehensive Carburetor Repair Kit

    $69.99
  • 3-Cavity Packard 56 Series Female Terminal Connector

    3-Cavity Packard 56 Series Female Terminal Connector

    $1.31
  • carburetor kit

    Zenith Carburetor Rebuild Kit

    $39.50